电气工程论文网


  • 首页|
  • 自动化毕业论文|
  • 电子机电毕业论文|
  • 电子通信论文|
  • 电气工程论文|
  • 电子信息工程|
  • 电气工程原创论文|
  • 电气工程免费论文|
原创毕业论文 → 电气工程专业原创毕业论文   现成毕业论文范文 → 电气工程专业毕业论文范文

论文降重

当前位置:电气工程论文网 -> 电子通信免费论文 -> 基于思科设备得VPN实现(六)

基于思科设备得VPN实现(六)

本文ID:LW5957
基于思科设备得VPN实现(六)

 Comany(config-if)#clock rate 64000
 Comany(config-if)#ip address 172.16.0.1 255.255.255.0
 Comany(config-if)#no shutdown
 Comany(config-if)#exit
 Comany(config)#
 配置总公司到分公司路由器的静态路由
 Comany(config)#ip route 172.16.1.0 255.255.255.0 172.16.0.2
 Comany(config)#ip route 172.16.2.0 255.255.255.0 172.16.0.2
 
 设置tunnel0通道指向分公司1
 Comany(config)#interface tunnel0
 Comany(config-if)#ip address 1.1.1.1 255.255.255.0
 Comany(config-if)#tunnel source serial0/1
 Comany(config-if)#tunnel destination 172.16.1.1
 Comany(config)#ip route 192.168.20.0 255.255.255.0 tunnel0
 
 设置tunnel1通道指向分公司2
 Comany(config)#interface tunnel1
 Comany(config-if)#ip address 2.2.2.1 255.255.255.0
 Comany(config-if)#tunnel source serial0/1
 Comany(config-if)#tunnel destination 172.16.2.1
 Comany(config)#ip route 192.168.30.0 255.255.255.0 tunnel1
 5.2.3 分公司1路由器配置
 配置过程:
 配置分公司1路由器名为Comany1
 Router>                      
 Router>enable                
 Router#                       
 Router#configure terminal    
 Router(config)#
 Router(config)#hostname Comany1
 Comany1(config)#
 配置分公司1内网地址
 Comany1(config)#interface Ethernet0/0  
 Comany1(config-if)#ip address 192.168.20.20  255.255.255.0
 Comany1(config-if)#ip nat inside             
 Comany1(config-if)#no shutdown             
 Comany1(config-if)#exit
 Comany1(config)#
 
 设置分公司串口0的地址
 Comany1(config)#interface serial 0/0
 Comany1(config-if)#clock rate 64000
 Comany1(config-if)#ip address 172.16.1.1 255.255.255.0
 Comany1(config-if)#no shutdown
 Comany1(config-if)#exit
 Comany1(config)#
 
 静态路由配置公司1路由器到总部路由器
 Comany1(config)#ip route 172.16.0.0 255.255.255.0 172.16.1.2
 
 静态路由配置公司1路由器到公司2路由器
 Comany1(config)#ip route 172.16.2.0 255.255.255.0 172.16.1.2
 
 配置分公司1与总公司得tunnel0通道
 Comany1(config)#
 Comany1(config)#interface tunnel0
 Comany1(config-if)#ip address 1.1.1.2 255.255.255.0
 Comany1(config-if)#tunnel source serial0/0
 Comany1(config-if)#tunnel destination 172.16.0.1
 Comany1(config)#ip route 192.168.10.0 255.255.255.0 tunnel0
 
 配置分公司1与分公司2得tunnel2通道
 Comany1(config)#
 Comany1(config)#interface tunnel2
 Comany1(config-if)#ip address 3.3.3.1 255.255.255.0
 Comany1(config-if)#tunnel source serial0/0
 Comany1(config-if)#tunnel destination 172

首页 上一页 3 4 5 6 7 8 9 下一页 尾页 6/10/10

下载地址 WORD格式全文下载链接(充值:元)


基于思科设备得VPN实现(六)......
论文人工降重
本论文《基于思科设备得VPN实现(六)》在电子通信免费论文栏目,由电气工程论文网整理,转载请注明来源 www.dqlunwen.top 更多论文,请点电气工程论文查看
上一篇:软件无线电安全保密通信仿真系统 下一篇:免费毕业论文--单片机串行通信发..

点击查看关于 基于 思科 设备 VPN 实现 的相关论文题目 2010-03-23 19:36:58【返回顶部】
联系方式

相关栏目

光机电应用技术
机电一体化
应用电子技术
电子信息工程技术
自动化免费论文
自动化专业毕业论文
电子专业免费论文
电子机电毕业论文
电气工程免费论文
测控技术与仪器
电气工程原创论文
电子通信论文
电气自动化开题
电子机电开题报告
电子通信免费论文
PLC相关外文翻译
电子机电信息外文翻译
电子通信外文翻译
联系方式
电子信息工程论文下载
电气工程论文下载


联系方式


电气工程论文网提供电气工程论文范文,电气工程毕业论文,网站永久域名www.dqlunwen.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2022 电气工程论文网 版权所有