电气工程论文网


  • 首页|
  • 自动化毕业论文|
  • 电子机电毕业论文|
  • 电子通信论文|
  • 电气工程论文|
  • 电子信息工程|
  • 电气工程原创论文|
  • 电气工程免费论文|
原创毕业论文 → 电气工程专业原创毕业论文   现成毕业论文范文 → 电气工程专业毕业论文范文

论文降重

当前位置:电气工程论文网 -> 电子机电毕业论文 -> 6Kv变电所及低压配电系统的设计

6Kv变电所及低压配电系统的设计

本文ID:LW5205 字数:17270,页数:42
6Kv变电所及低压配电系统的设计

论文编号:JD782 附任务书,开题报告,文献综述, 论文字数:17270,页数:42

摘要:随着现代文明的发展与进步,社会生产和生活对电能供应的质量和管理提出了越来越高的要求。作为电能传输与控制的中间枢纽,变电所必须改变传统的设计和控制模式,才能适应现代电力系统、现代化工业生产和社会生活的发展趋势。此工厂供电设计包括:负荷的计算及无功功率的补偿;变电所主变压器台数和容量、型式的确定;变电所主接线方案的选择;进出线的选择;短路计算和开关设备的选择;二次回路方案的确定及继电器保护的选择和整定;防雷保护与接地装置的设计;车间配电线路布线方案的确定;线路导线及其配电设备和保护设备的选择;以及电气照明的设计,还有电路图的绘制。

关键词:变电所 变压器 断路器 继电器 隔离开关 互感器 熔断器

Transformer Substation And
the Low electric Circuit wire design

Keyword: Transformer substation Voltage transformer Circuit breaker Relay Isolate the switch Mutual inductor Fuse box

ABSTRACT: With development and progress of modern civilization, social production and is it put forward high request more and more to quality and management that electric energy supply to live. As the pivot between what the electric energy is transmitted and controlled, the transformer substation must change the traditional design and control the mode , could meet modern power system , modernized industrial production and development trend of social life . This factory supplies power and designs including: Calculation of load and compensation of the inactive power; Transformer substation main voltage transformer platform count and capacity , sureness of pattern; Mainly wire the choice of the scheme in the transformer substation; Pass in and out the choice of the thread; Choice of shorting out and calculating and switchgear ; Two return circuit sureness and choice that relay protect of scheme exactly make; Defend the thunder and protect the design with the earth device ; The workshop distribution line connects up the sureness of the scheme; Circuit wire and distribution equipment and protecting the choice of the equipment; And the electric design that lighted, there is drawing of circuit diagram.

 

目   录
摘  要  Ⅰ
Abstract Ⅰ
第1章  6KV车间变电所及低压配电线路设计 1
1.1 总体设计方案 1
1.2负荷计算及无功补偿 3
1.2.1 负荷计算  3
1.2.2 无功补偿  7
1.3 变电所的主变压器台数和容量的选择  8
1.3.1 主变压器台数的选择  8
1.3.2 主变压器容量的选择 8
1.4 变电所主接线方案的设计 9
1.5 短路电流和容量的计算  11
1.6 变电所一次设备的选择  14
1.6.1 一次设备选择的一般要求 14
1.6.2 选择各类电气设备的特殊要求  14
1.6.3 一次设备校验应满足的条件  15
1.7 变电所高压进线和低压出线的选择 17
1.7.1 变电所进线方式的选择 17
1.7.2 变配电所进出导线和电缆的选择  17
1.7.3 各类电力线路的导线截面的选择步骤  17
1.7.4 电力线路选择的具体公式  18
1.7.5 设计进出线的选择 19
1.8 车间配电线路的设计 21
1.8.1  6KV高压母线的选择 22
1.8.2 车间变电所低压侧母线的选择 23
第2章 继电保护及二次回路的设计 24
21 继电保护装置的基本要求 24
2.2 二次回路的接线安装要求  24
2.3 引入盘、柜的电缆及其芯线应符合的要求  25
2.4  6KV车间主变压器的保护装置设计 25
2.5 高压断路器的操动机构控制与信号回路  27
2.6 防雷保护和接地装置的设计  28
结束语 30
参考文献  31
致  谢  32
附录A  45
附录B  46

下载地址 WORD格式全文下载链接(充值:158元)


6Kv变电所及低压配电系统的设计......
论文人工降重
本论文《6Kv变电所及低压配电系统的设计》在电子机电毕业论文栏目,由电气工程论文网整理,转载请注明来源 www.dqlunwen.top 更多论文,请点电气工程论文查看
上一篇:10kV变电所及低压配电系统的设计 下一篇:多功能充电器的硬件开发

点击查看关于 6Kv 变电所 低压 配电 系统 设计 的相关论文题目 2009-10-28 14:56:55【返回顶部】
联系方式

相关栏目

光机电应用技术
机电一体化
应用电子技术
电子信息工程技术
自动化免费论文
自动化专业毕业论文
电子专业免费论文
电子机电毕业论文
电气工程免费论文
测控技术与仪器
电气工程原创论文
电子通信论文
电气自动化开题
电子机电开题报告
电子通信免费论文
PLC相关外文翻译
电子机电信息外文翻译
电子通信外文翻译
联系方式
电子信息工程论文下载
电气工程论文下载


联系方式


电气工程论文网提供电气工程论文范文,电气工程毕业论文,网站永久域名www.dqlunwen.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2022 电气工程论文网 版权所有