电气工程论文网


  • 首页|
  • 自动化毕业论文|
  • 电子机电毕业论文|
  • 电子通信论文|
  • 电气工程论文|
  • 电子信息工程|
  • 电气工程原创论文|
  • 电气工程免费论文|
原创毕业论文 → 电气工程专业原创毕业论文   现成毕业论文范文 → 电气工程专业毕业论文范文

论文降重

当前位置:电气工程论文网 -> 电子机电毕业论文 -> 多功能时钟打点系统设计

多功能时钟打点系统设计

本文ID:LW5635 字数:8353,页数:31
多功能时钟打点系统设计

论文编号:JD919   论文字数:8353,页数:31

摘要
 多功能时钟打点系统采用AT89C51单片机作为核心器件控制外围元件实现多功能智能打点,即实现在设定多种时刻,多种情况进行响铃。该系统的工作过程是利用AT89C51单片机读时钟芯片DS1302并与EEPROM中设定的打点时间相比较,若与设定的打点时刻相吻合,就通过AT89C51控制音乐芯片响铃。此外,该系统还设置有键盘和LCD显示,可以实现对打点时刻的设置,设置的数据将保存在EEPROM中。由于采用的是EEPROM所以该系统在掉电时仍然能保存预先设置的数据,而保持原有的响铃时间。
 关键词:   AT89C51单片机   时钟芯片DS1302   EEPROM

Abstract
  Multi-functional clock get ready system abandon whom tradition ring bell tedious , instead of modernization beautiful , pleasant environmental music, let student immerse in beauty of the music in each ring tones , experience the glamour of the music, form the joyful mental state . Not only activate students' artistic cell but also reach and optimize and educate people's environment, mould the result of student's sentiment. Advance quality-oriented education virtually, build the good campus atmosphere. The school and some enterprises and institutions use this system as going to school and leave school , signal of the daily schedule on and off duty ,etc. extensively.
 Multi-functional clock get ready system adopt AT89C51 one-chip computer control as key device peripheral component realize multi-functional intelligence get ready, namely realize sounding the bell in many kinds of situations at the moment of establishing a lot of kind. System this working course to spend AT89C51 one-chip computer read clock chip DS1302 and get ready time compare with with whom EEPROM set for, get ready constantly identical with establish , control the chip loud bell of music through AT89C51. In addition should systematic to set up keyboard and LCD show , can realize to establishment to get ready the moment also, the data set up will be kept in EEPROM. Because that adopted is EEPROM this system can still keep the data set up in advance while losing the electricity, and keep already existing loud bell time.

目录
摘要 I
Abstract II
一、方案设计与论证 1
1.1系统整体方案论证 1
方案一 1
方案二 1
1.2电路的方案设计与比较 2
1.2.1时钟模块 2
1.2.2 存储模块 3
1.2.3 显示模块 3
1.2.4 按键模块 4
1.2.5 响铃模块 4
1.2.6 单片机模块 5
二、电路设计 6
2.1 时钟单元及时间校正电路设计 6
2.1.1  DS1302时钟芯片结构和功能 8
2.1.2 DS1302在测量系统中的硬件电路 11
2.1.3读DS1302时的MCS51汇编语言程序 13
2.2 键盘模块单元电路设计 14
2.3 储模块单元电路设计 19
2.4 LCD显示模块单元电路设计 20
三、测试方法与测试结果 25
3.1 测试仪器 25
3.2 测试结果 25
总结 27
参考文献 28

下载地址 WORD格式全文下载链接(充值:118元)


多功能时钟打点系统设计......
论文人工降重
本论文《多功能时钟打点系统设计》在电子机电毕业论文栏目,由电气工程论文网整理,转载请注明来源 www.dqlunwen.top 更多论文,请点电气工程论文查看
上一篇:基于单片机的电子密码锁的设计 下一篇:多功能倒计时显示牌

点击查看关于 多功能 时钟 打点 系统 设计 的相关论文题目 2010-03-06 19:42:42【返回顶部】
联系方式

相关栏目

光机电应用技术
机电一体化
应用电子技术
电子信息工程技术
自动化免费论文
自动化专业毕业论文
电子专业免费论文
电子机电毕业论文
电气工程免费论文
测控技术与仪器
电气工程原创论文
电子通信论文
电气自动化开题
电子机电开题报告
电子通信免费论文
PLC相关外文翻译
电子机电信息外文翻译
电子通信外文翻译
联系方式
电子信息工程论文下载
电气工程论文下载


联系方式


电气工程论文网提供电气工程论文范文,电气工程毕业论文,网站永久域名www.dqlunwen.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2022 电气工程论文网 版权所有