电气工程论文网


  • 首页|
  • 自动化毕业论文|
  • 电子机电毕业论文|
  • 电子通信论文|
  • 电气工程论文|
  • 电子信息工程|
  • 电气工程原创论文|
  • 电气工程免费论文|
原创毕业论文 → 电气工程专业原创毕业论文   现成毕业论文范文 → 电气工程专业毕业论文范文

论文降重

当前位置:电气工程论文网 -> 电子机电毕业论文 -> 电压无功补偿综合控制装置

电压无功补偿综合控制装置

本文ID:LW886 字数:31854,页数:79
电压无功补偿综合控制装置

论文编号:JD084    包括大图,字数:31854,页数:79

摘 要
无功补偿的方法多种多样,最常见的就是并联电容器补偿。低压动态无功补偿装置是采用交流采样的方法对三相电压和电流分别采样,每周期测出20个瞬时值,经AD574把模拟量转换为12位数字量,由有效值计算公式算出每相电压、电流和无功功率Q,利用电压和无功构成的综合判据通常规定了电压和无功的上下限,并把电压和无功平面分成9个区,根据电压和无功的综合控制方法,通过晶闸管控制电容器的投切对电压和无功实行综合调节,以保证电压在合格范围内,同时实现无功的基本平衡。。
本装置对三相无功分别补偿,采用晶闸管作为无触点开关,利用过零比较器可实现对电容器组的无过渡过程的快速投切,避免了合闸时产生冲击电流损坏电器元件。电容器组的投切方式采用编码投切,三组电容器按容量比1:2:4即可组合成7个容量等级,投切控制方便,经济效益显著。
控制电路主要由交流采样单元、外部扩展单元、显示单元、控制单元等组成,硬件紧凑,编程容易,控制简单。本装置对电网参数实时检测,对系统无功实行跟踪补偿。补偿效果快速、准确、安全、易于控制,应用前景十分广阔。

关键词   无功补偿    综合控制    晶闸管开关

 

Abstract
    Reactive compensation variety of ways, the most common is the shunt capacitor compensation. LV dynamic reactive compensation devices is the use of sampling methods for three-phase voltage and current, respectively sampling, week period measured 20 instantaneous value, AD574 conversion from analog to digital 12. RMS calculated by the formula calculated for each phase voltage, current and reactive power Q, the use of voltage and reactive composition of the criteria usually provides the voltage and reactive power of the lower and upper limits and voltage and reactive plane divided into nine districts, according to the voltage and reactive power integrated control method, thyristor controlled by the switching capacitor pair of voltage and reactive power integrated regulate in order to ensure that qualified voltage range, Reactive while achieving the basic balance.
The device respectively compensation three-phase reactive, using thyristor as a non-contact switch, Comparing the use of zero for the capacitors can be realized without the group's rapid transition to the top, Closing avoid the shocks arising from the current damage to the electrical components. The capacitor switching is used for encoding all three groups capacitor capacity by more than 1 : 2 : 4 will be combined into seven levels of capacity, switching control convenience, significant economic benefits.
Control circuit mainly include the exchange of sampling unit, the external expansion unit, display units, the control unit and other components, compact hardware, Programming easy, simple control. The device to real-time detection of network parameters, the system implemented tracking reactive compensation. Compensation results fast, accurate, safe and easy to control, very broad application prospects.

Key  words  reactive compensation   comprehensive control   thyristor switches

 

目 录
摘要........................................................... I
Abstract .......................................................II

第1章绪论......................................................1
1.1无功补偿的定义与作用 ........................................1
1.2课题背景.....................................................2
1.3国内外研究现状...............................................3
1.4本文研究的主要内容 ..........................................4
第2章无功补偿原理及调节判据 ...................................5
2.1无功补偿的原理...............................................5
2.1.1电压损耗与电压损失率的计算................................ 5
2.1.2并联电容器补偿.............................................7
2.2并联补偿电容器的配置原则 ...................................11
2.3调节判据的选择..............................................11
第3章 主系统设计...............................................15
3.1主电路......................................................15
3.2电容器组投切及晶闸管过零电路比较 ...........................17
3.2.1电容器组投切方式..........................................17
3.2.2晶闸管电压过零触发电路 ...................................19
3.3器件的选型..................................................21
第4章 TSC控制装置的硬件电路设计................................24
4.1电压电流的转换..............................................25
4.2数据采集电路................................................28
4.3单片机及其扩展电路 .........................................33
4.4键盘及显示电路 .............................................39
4.5投切控制电路................................................42
第5章软件设计 ................................................46
社会经济效益分析...............................................50
结论.........................................................  51
致  谢 ....................................................... 52
参考文献...................................................... 53
附录1 ........................................................ 55
附录2 ........................................................ 61
附录3...................................................... .. 69

下载地址 WORD格式全文下载链接(充值:118元)


电压无功补偿综合控制装置......
论文人工降重
本论文《电压无功补偿综合控制装置》在电子机电毕业论文栏目,由电气工程论文网整理,转载请注明来源 www.dqlunwen.top 更多论文,请点电气工程论文查看
上一篇:气体泄漏超声检测系统的设计 下一篇:FC-TCR型无功补偿装置控制器的设计

点击查看关于 电压无功补偿 综合控制装置 的相关论文题目 2009-06-09 13:56:58【返回顶部】
联系方式

相关栏目

光机电应用技术
机电一体化
应用电子技术
电子信息工程技术
自动化免费论文
自动化专业毕业论文
电子专业免费论文
电子机电毕业论文
电气工程免费论文
测控技术与仪器
电气工程原创论文
电子通信论文
电气自动化开题
电子机电开题报告
电子通信免费论文
PLC相关外文翻译
电子机电信息外文翻译
电子通信外文翻译
联系方式
电子信息工程论文下载
电气工程论文下载


联系方式


电气工程论文网提供电气工程论文范文,电气工程毕业论文,网站永久域名www.dqlunwen.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2022 电气工程论文网 版权所有