电气工程论文网


  • 首页|
  • 自动化毕业论文|
  • 电子机电毕业论文|
  • 电子通信论文|
  • 电气工程论文|
  • 电子信息工程|
  • 电气工程原创论文|
  • 电气工程免费论文|
原创毕业论文 → 电气工程专业原创毕业论文   现成毕业论文范文 → 电气工程专业毕业论文范文

论文降重

当前位置:电气工程论文网 -> 电气工程论文下载 -> 三相异步电机的电磁设计

三相异步电机的电磁设计

本文ID:LW17108 字数:11428,页数:38

论文编号:DQ147   论文字数:11428,页数:38

摘要
 设计一台电机时,必须确定许多尺寸,但其中起主要与决定作用的是电机的主要尺寸。主要尺寸确定后,其它尺寸也就可以大体确定。电机的工作特性和运行可靠性也都和主要尺寸以及它们的比值有密切关系。
 电阻、电抗是电机的重要参数。电阻的大小不仅影响电机的经济性,并且与电机的运行性能有极密切的关系。绕组电抗的大小对所设计的经济性及运行性能有很大的影响。因此正确选定及计算这些参数是极其重要的。
 在主要尺寸、气隙以及定转子绕组和铁心设计好以后,就要进行工作性能的计算和起动性能的计算。三相异步电机的起动性能主要是指起动转矩和起动电流对相应额定值的倍数。三相异步电机的起动特性则由电机的参数决定。
 关键词 :电机、电机参数、工作性能、起动性能
 
 Abstract
 Many dimensions have to be determined when designing a motor, but the main dimensions plays an important role in this progress. Once it has been done, other dimensions can generally be determined. The working characteristic of motor and operation reliability and main dimensions and their ratio have close relations.
 Resistance and reactance. is an important parameter of the motor. The size of the resistance not only affect motors economy value but also have a close relationship with the motors running performance . The size of the circuit reactance winding has an great impact on the designing of economy and performance. Therefore the selection and calculation of these parameters are extremely important.
 When the main dimensions, air gap and the stator windings and core design work is good, it has to do the working performance of the calculation and starting performance calculation.. Three-phase asynchronous motor start-up performance mainly refers to the starting torque and starting current to the corresponding ratings .Three-phase asynchronous motor starts depends on the characteristic of motor parameters
 
Keywords:  Motor , Motor parameters,Work performance ,Start performance 
 
目  录
摘要 II
Abstract III
第一章  绪论 1
1.1  研究的背景与意义 1
1.2   异步电机在国内的发展状况 2
第二章  三相异步电机简介 5
2.1  三相异步电机的工作原理 5
2.2  三相异步电动机的调速方法 5
第三章  三相异步电机的电磁设计 7
3.1   主要尺寸的确定 7
3.1.1  额定数据 7
3.1.2  电磁负荷的选择 7
3.1.2 主要尺寸的确定 7
3.2   定子绕组与槽型尺寸的确定 8
3.2.1  定子绕组的选择与计算 8
3.2.2  定子槽形尺寸的确定 10
3.3   转子绕组与槽形尺寸的确定 11
3.3.1  转子槽形尺寸的确定 11
3.3.2  端环尺寸的确定 13
3.4     磁路计算 13
3.4.1  磁路计算的目的与方法概述 13
3.4.2  齿部磁势的计算 14
3.4.3  轭部磁势的计算 15
3.4.4  空气隙磁势的计算及满载磁化电流的计算 16
3.5  参数的计算 17
3.6  运行性能的计算 21
3.6.1  额定负载时的定转子电流计算 21
3.6.2  异步电机的损耗计算 23
3.6.3  运行性能计算 24
3.7  起动性能计算 26
第四章  异步电机电磁设计的调整 29
总结 32
致谢 33
参考文献: 34

下载地址 WORD格式全文下载链接(充值:128元)

三相异步电机的电磁设计相关论文
论文人工降重

本论文《三相异步电机的电磁设计》在电气工程论文下载栏目,由电气工程论文网整理,转载请注明来源 www.dqlunwen.top 更多论文,请点电气工程论文查看
上一篇:文件同步系统软件开发 下一篇:汇丽电机10kV变电所一次系统的设计
点击查看关于 三相 异步 电机 电磁 设计 的相关论文题目 2011-04-02 15:38:08【返回顶部】
联系方式

相关栏目

光机电应用技术
机电一体化
应用电子技术
电子信息工程技术
自动化免费论文
自动化专业毕业论文
电子专业免费论文
电子机电毕业论文
电气工程免费论文
测控技术与仪器
电气工程原创论文
电子通信论文
电气自动化开题
电子机电开题报告
电子通信免费论文
PLC相关外文翻译
电子机电信息外文翻译
电子通信外文翻译
联系方式
电子信息工程论文下载
电气工程论文下载


联系方式


电气工程论文网提供电气工程论文范文,电气工程毕业论文,网站永久域名www.dqlunwen.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2022 电气工程论文网 版权所有