PCI接口测试系统设计

论文编号:ZD506 论文字数:13047,页数:26，有任务书，PPT,

摘 要：“实时视频采集及预处理系统”其主要目的是：实时采集标准PAL制视频，并且对采集到的无压缩的视频信息进行预处理，然后将处理后的有用信息传送软件系统进行高级处理。由于本系统采集视频数据的数据传输率高达40MB/s，所以必须采用当今主流的PCI总线与PC相连。
 本设计主要是将噪声信号产生器产生的信号、存储、经PCI接口送入主机供应用软件使用，在本次设计中用一个白噪声信号发生器来模拟产生图象的数字信号。
 
 关键词：PCI局部总线操作，PCI局部总线

Design of PCI Interface

 Abstract:The system of real time video frequency collection and pretreatment is the subsystem of the system with 3D laser colorful scanning. Its first objective is to collect the standard PAL video frequency with real time, and to pre-process the video frequency without being compressed, then to send the useful information after processing to the software system that processes this information. Because the data bit in this system is as high as 40M/S, we have to use the PCI Bus that is prevailing now to connect with PC.
 This design is the noise signal creation machine creation signal and save and was connected by PCI primarily arithmetic figure signal that a people sends into the host supply uses the software usage, imitating to produce the portrait in the convenient a noise signal in this design occurrence machine.
 
 Key Word: Operation of PCI Local Bus, PCI Local Bus

目 录
摘要 …………………………………………………………………….1
第一章  PCI局部总线信号定义……………………………………….2
1.1 信号类型说明 ……………………………………………………...2
1.2 PCI局部总线信号定义………………………………………………3
1.2.1系统信号定义 ……………………………………………………...3
1.2.2地址和数据信号…………………………………………………….3
1.2.3 接口控制信号……………………………………………………...4
1.2.4 仲裁信号…………………………………………………………..5
1.2.5 错误报告信号……………………………………………………..5 
1.2.6 中断信号………………………………………………………….6
1.2.6.1 中断引脚及功能 ……………………………………………6 
1.3 PCI总线命令 ………………………………………………………7
1.3.1 总线命令编码 ………………………………………………….…7
第二章 基本设计原理………………………………………………….8
2.1 选题背景……………………………………………………………8
2.2 总体模块功能论述………………………………………………….9
2.3 选件选择…………………………………………………………..11
2.4 设计总体框图…………………………………………………………11
第三章 总体模块实现…………………………………………….…...11
3.1 信号产生模块……………………………………………………….11
3.1.1 时钟产生…………………………………………………………..12
3.1.2 噪声信号产生器……………………………………………………12
3.1.3 分频器……………………………………………………………..12
3.1.4 移位寄存器………………………………………………………...12
3.1.5 FIFO……………………………………………………………….12
3.2  PCI模块…………………………………………………………..13
3.3 存储模块…………………………………………………………..18
3.4 PCI 连接器模块……………………………………………………19
参考文献……………………………………………………………….21
小节与致谢……………………………………………………………22
附录……………………………………………………………………23

 WORD格式全文下载链接(充值:118元)

PCI接口测试系统设计......