电气工程论文网


  • 首页|
  • 自动化毕业论文|
  • 电子机电毕业论文|
  • 电子通信论文|
  • 电气工程论文|
  • 电子信息工程|
  • 电气工程原创论文|
  • 电气工程免费论文|
原创毕业论文 → 电气工程专业原创毕业论文   现成毕业论文范文 → 电气工程专业毕业论文范文

论文降重

当前位置:电气工程论文网 -> 自动化专业毕业论文 -> 基于PLC的智能车库门控系统的设计

基于PLC的智能车库门控系统的设计

本文ID:LW7539 字数:3580,页数:12
基于PLC的智能车库门控系统的设计

论文编号:ZD673    论文字数:3580,页数:12


摘要
    本文提出一种运用可编程控制器(PLC)对住宅小区停车场汽车进出及停放指示进行管理的方案,此方案大大提高了设计效率,维护周期短且调试方便,成本较低。同时更令我们的车库门增添了不少高贵典雅的气息。可编程控制器(PLC)在继电器的控制和计算机控制的基础上开发出来的,是一种应用于工业生产过程控制,具有实时数字化处理能力的硬件设备,为工业自动化提供高可靠性的自动控制装置。
 由于门控系统的适用性、可编程控制器(PLC)的优越性,为此我设计自动控制装置,它靠车辆检测器自动检测有无车辆通过,具有安装维护简单、方便可靠、节能和安全等多种特性。
关键词:PLC  停车场  车库门  可编程控制器

 

Abstract

   This article proposed that one kind utilizes programmable controller (PLC) to pass in and out to the residential district parking lot automobile and to park the instruction to carry on the management the plan, this plan raised the rated capacity greatly, maintains the cycle to be short, and debugs conveniently, the cost is low. Simultaneously made our garage gate to increase many noble elegant breath. The programmable controller (PLC) develops in relay's control and in computer control's foundation, is one kind applies in the industrial production process control, has the real-time digitization handling ability hardware equipment, provides the redundant reliable for the industrial automation automatic control device. As a result of gating system's serviceability, programmable controller (PLC) the superiority, I design the automatic control device for this reason, whether there does it pass depending on the vehicles detector automatic detection vehicles, has installs the maintenance simple, convenient reliable, the energy conservation and the security and so on many kinds of characteristics.

key word: PLC parking lot garage gate programmable controller

 

目录
摘要 I
Abstract II
目录 III
一、引言 1
二、系统功能介绍 1
1、可编程控制器(PLC)简介 1
2、指示板简介 2
3、语音系统简介 2
4、身份识别及车库门开关简介 3
三、系统设计 4
1、主电路设计 4
2、PLC外部接线图的设计 4
3、顺序功能流程图的设计 5
4、PLC梯形图的设计 6
结论 9
参考文献 9

下载地址 WORD格式全文下载链接(充值:50元)


基于PLC的智能车库门控系统的设计......
论文人工降重
本论文《基于PLC的智能车库门控系统的设计》在自动化专业毕业论文栏目,由电气工程论文网整理,转载请注明来源 www.dqlunwen.top 更多论文,请点电气工程论文查看
上一篇:基于MCGS组态的电梯模型设计 下一篇:基于PLC的真空覆膜机控制系统设计

点击查看关于 基于 PLC 智能 车库 系统 设计 的相关论文题目 2010-06-15 13:58:07【返回顶部】
联系方式

相关栏目

光机电应用技术
机电一体化
应用电子技术
电子信息工程技术
自动化免费论文
自动化专业毕业论文
电子专业免费论文
电子机电毕业论文
电气工程免费论文
测控技术与仪器
电气工程原创论文
电子通信论文
电气自动化开题
电子机电开题报告
电子通信免费论文
PLC相关外文翻译
电子机电信息外文翻译
电子通信外文翻译
联系方式
电子信息工程论文下载
电气工程论文下载


联系方式


电气工程论文网提供电气工程论文范文,电气工程毕业论文,网站永久域名www.dqlunwen.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2022 电气工程论文网 版权所有