电气工程论文网


  • 首页|
  • 自动化毕业论文|
  • 电子机电毕业论文|
  • 电子通信论文|
  • 电气工程论文|
  • 电子信息工程|
  • 电气工程原创论文|
  • 电气工程免费论文|
原创毕业论文 → 电气工程专业原创毕业论文   现成毕业论文范文 → 电气工程专业毕业论文范文

论文降重

当前位置:电气工程论文网 -> 自动化专业毕业论文 -> PLC在配料生产线上的应用 毕业论文

PLC在配料生产线上的应用 毕业论文

本文ID:LW649 字数:7567,页数:25
PLC在配料生产线上的应用 毕业论文

论文编号:ZD022     包括开题告,任务书   西门子S7-200系列PLC  字数:7567,页数:25  

摘 要:随着科学技术的日新月异,自动化程度要求越来越高,原有的生产装料装置远远不能满足当前高度自动化的需要。减轻劳动强度,保障生产的可靠性、安全性,降低生产成本,减少环境污染、提高产品的质量及经济效益是企业生成所必须面临的重大问题。我们为各个装料生产领域所生产的可编程控制器装料系统。它集成自动控制技术、计量技术、新传感器技术、计算机管理技术于一体的机电一体化产品;充分利用计算机技术对生产过程进行集中监视、控制管理和分散控制;充分吸收了分散式控制系统和集中控制系统的优点,采用标准化、模块化、系统化设计,配置灵活、组态方便。


关键词:plc 可编程控制器 自动配料


Abstract :Along with science's and technology's changing with each new day, the automaticity request is getting higher and higher, the original production feeds the installment not to be able to satisfy current highly automated by far the need. Reduces the labor intensity, the safeguard production reliability, the security, reduces the production cost, reduces the environmental pollution, to enhance the product the quality and the economic efficiency is the major issue which the enterprise produces must face. We to feed the programmable controller charging system which one by one realm of production produces. It integrates the automatic control technology, the Measurement Technique, the new sensor technology, the computer management technology in a body's integration of machinery product; Carries on the centralism surveillance, the control supervisor fully using the computer technology to the production process and disperses the control; Has absorbed the dispersion-like control system and the common control system's merit fully, uses the standardization, the modulation, the systematized design, the disposition is nimble, the configuration is convenient.

key word: the plc programmable controller feeds automatically

目 录
摘 要 2
Abstract. 2
第一章 绪论 4
1.1 可编程控制配料系统应用的背景及目的 4
1.2 可编程控制配料系统的应用 4
1.2.1可编程控制配料系统的特点及应用 4
1.2.2可编程序控制器的特点及应用 5
1.3毕业设计任务及要求 7
第二章 可编程控制配料系统设计和工作原理 8
2.1系统简介 8
2.2工作原理 9
2 .3可编程控制器的选型及控制系统的地址分配 10
2.4主电路设计 11
2.5控制电路的设计 12
2. 6 A/D 转换电路设计 14
第三章   软件设计 15
3.1程序功能图的设计 15
3.2程序的设计 15
3.2.1系统的梯形图 16
3.2.2系统的语句表 19
四章  材料清单 22
4.1可编程控制配料系统设备材料清单如下 22
      4.2注意事项 22
全文 总结 23
参考文献 24
致   谢 24

下载地址 WORD格式全文下载链接(充值:128元)


PLC在配料生产线上的应用 毕业论文......
论文人工降重
本论文《PLC在配料生产线上的应用 毕业论文》在自动化专业毕业论文栏目,由电气工程论文网整理,转载请注明来源 www.dqlunwen.top 更多论文,请点电气工程论文查看
上一篇:三菱PLC在五层电梯控制中的应用 下一篇:基于PLC控制的立体车库系统设计

点击查看关于 PLC 配料 生产线 应用 毕业论文 的相关论文题目 2009-06-09 11:48:21【返回顶部】
联系方式

相关栏目

光机电应用技术
机电一体化
应用电子技术
电子信息工程技术
自动化免费论文
自动化专业毕业论文
电子专业免费论文
电子机电毕业论文
电气工程免费论文
测控技术与仪器
电气工程原创论文
电子通信论文
电气自动化开题
电子机电开题报告
电子通信免费论文
PLC相关外文翻译
电子机电信息外文翻译
电子通信外文翻译
联系方式
电子信息工程论文下载
电气工程论文下载


联系方式


电气工程论文网提供电气工程论文范文,电气工程毕业论文,网站永久域名www.dqlunwen.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2022 电气工程论文网 版权所有