基于FCS火灾监控报警系统-电气工程论文网

中文字数:2954,中文页数:5 英文字数:1605页数:5

With the continuous development of new technologies, interconnection of fire alarm controller there are increasingly high requirements. Fire alarm controller must not only complete the machine alarm linkage, and other functions, but also to send warning messages to other controller or alarm system. In this paper, based on the CAN bus fire alarm system, the system of arbitrary alarm controller can be equal on the bus from receiving other Alarm Controller alarm information, or other alarm controller issued a directive to overcome the "main from the "communications of all information must be exchanged through the mainframe shortcomings.
1, Introduction CAN Bus  with computer hardware, software and integrated circuit technology to the rapid development of industrial control systems have become computer technology in the field of a branch of the most dynamic, and has made tremendous progress. Because of the system's high reliability and flexibility requirements, the development of industrial control system mainly as follows: control-oriented diversified, decentralized systems-oriented, that is, load dispersed, decentralized function, dangerous scattered, and geographically dispersed.

基于FCS火灾监控报警系统

随着新技术的不断发展，对火灾报警控制器联网的要求也越来越高。火灾报警控制器不但要完成本机的报警、联动等功能，还要把报警信息传送到其它报警控制器或系统。本文介绍了基于CAN总线的火灾报警系统，系统中任意报警控制器都可以平等地从总线上接收其它报警控制器的报警信息，也可以对其它报警控制器发出指令，从而克服了"主从式"通讯中所有信息必须通过主机进行交换的缺点。　　1、CAN总线简介
 随着计算机硬件、软件技术及集成电路技术的迅速发展，工业控制系统已成为计算机技术应用领域中最具活力的一个分支，并取得了巨大进步。由于对系统可靠性和灵活性的高要求，工业控制系统的发展主要表现为：控制面向多元化，系统面向分散化，即负载分散、功能分散、危险分散和地域分散。

WORD格式全文下载链接(充值:19元)

基于FCS火灾监控报警系统相关论文

本论文《基于FCS火灾监控报警系统》在电子通信外文翻译栏目，由电气工程论文网整理,转载请注明来源 www.dqlunwen.top 更多论文,请点电气工程论文查看
上一篇：1λ偏差补偿的超声波定位系统	下一篇：变电站系统过电压防护技术

点击查看关于 基于 FCS 火灾监控报警系统 的相关论文题目

2010-05-09 09:04:53【返回顶部】