电气工程论文网


  • 首页|
  • 自动化毕业论文|
  • 电子机电毕业论文|
  • 电子通信论文|
  • 电气工程论文|
  • 电子信息工程|
  • 电气工程原创论文|
  • 电气工程免费论文|
原创毕业论文 → 电气工程专业原创毕业论文   现成毕业论文范文 → 电气工程专业毕业论文范文

论文降重

当前位置:电气工程论文网 -> 自动化专业毕业论文 -> 可充电电池智能测试系统的研究与设计

可充电电池智能测试系统的研究与设计

本文ID:LW7114 字数:17976,页数:70
可充电电池智能测试系统的研究与设计

论文编号:ZD512 论文字数:17976,页数:70,有开题报告,任务书,文献综述

摘  要: 基于新型的PIC单片机,配以高精度的测量控制系统、过压、过流、短路保护电路等,研究出可充电电池智能测试系统。着重围绕以系统的智能性、可靠性、安全性、广泛性等确定系统方案,设计了系统的工作原理框图、单元电路以及为硬件设计的相关系统软件。本系统具有高性能、低成本、安全可靠等特点。经测试,系统对可充电电池的各项性能指标的测试结果准确,测试方案新颖,便于电池生产厂家对电芯和成品电池的快速分选,确保产品的质量,并降低了成本和服务费用,能判别电池的好坏及掌握电池的各项性能指标,对质量管理及售后服务有十分重要的意义。

关键词: 单片机    电池    记忆效应    掉电保护 

The intelligence of rechargeable battery tests systematic research and design

ABSTRACT: On the basis of new-type PIC one-chip computer , mix with the high-accuracy measurement control system , excessive pressure , pass to flow , shorting out to protect the circuit etc., can work out the intelligence of the rechargeable battery and test the system. Focus on around with system intelligent , dependability , security , extensive one confirm the systematic scheme, Have designed the systematic operation principle block diagram , unit circuit and relevant systems soft ware designed for the hardware. Such characteristics as this system has high performance , low cost , safe and reliable. Through testing, the system is right but the test result of every performance index of the rechargeable battery is accurate, it is novel to test the scheme , benefit the fast sorting of the electric core and finished product battery of battery manufacturer , guarantee the quality of the products, reduce the cost and service expenses , can differentiate the quality of the battery and every performance index of mastering battery , have very important meaning to quality control and after-sale service.

 Keywords: One-chip computer    The battery    Memory effect    Lose the electricity to protect

 目      录

一、概  述……………………………………………………… 1
二、系统设计方案………………………………………………  3
 1、可充电电池原理 特性及其充电器………………………  3
 2、锂离子和镍氢电池的工作原理…………………………..  5
 3、锂离子和镍氢电池的结构………………………………..  5
 4、锂离子和镍氢电池的特点………………………………..  6
 5、锂离子和镍氢电池的存储特性…………………………..  7
 6、锂离子和镍氢电池的充电方法…………………………..  12
 7、充电器的工作原理………………………………………..  14
三、硬件设计……………………………………………………  16
四、软件设计……………………………………………………  19
五、程序流程图…………………………………………………  54
六、总结…………………………………………………………  61
七、参考文献……………………………………………………  61

下载地址 WORD格式全文下载链接(充值:168元)


可充电电池智能测试系统的研究与设计......
论文人工降重
本论文《可充电电池智能测试系统的研究与设计》在自动化专业毕业论文栏目,由电气工程论文网整理,转载请注明来源 www.dqlunwen.top 更多论文,请点电气工程论文查看
上一篇:沥青混泥土搅拌设备配料系统的智.. 下一篇:基于FPGA的DDS设计

点击查看关于 充电电池 智能 测试系统 研究 设计 的相关论文题目 2010-05-16 14:28:41【返回顶部】
联系方式

相关栏目

光机电应用技术
机电一体化
应用电子技术
电子信息工程技术
自动化免费论文
自动化专业毕业论文
电子专业免费论文
电子机电毕业论文
电气工程免费论文
测控技术与仪器
电气工程原创论文
电子通信论文
电气自动化开题
电子机电开题报告
电子通信免费论文
PLC相关外文翻译
电子机电信息外文翻译
电子通信外文翻译
联系方式
电子信息工程论文下载
电气工程论文下载


联系方式


电气工程论文网提供电气工程论文范文,电气工程毕业论文,网站永久域名www.dqlunwen.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2022 电气工程论文网 版权所有